How to Take Pedals Off a Bike
How to Take Pedals Off a Bike
Changing your bike pedals can seem daunting at first, especially if you are new to cycling maintenance. However, with a bit of guidance and the right approach, it can be a straightforward process. This guide will help you understand the tools required for changing pedals, the difference between left and right pedals, and offer a step-by-step approach to removing and fitting pedals. Additionally, we will recommend some top-quality bicycle pedals and provide advice on cycling cleats to enhance your riding experience. Whether you’re upgrading your setup or performing routine maintenance, this article will equip you with the knowledge needed to efficiently handle your bike pedals.
Tools required to change bike pedals
Having the right tools at your disposal is key to successfully changing your bike pedals. The primary tools you will need are a pedal wrench or an Allen key. While a traditional pedal wrench is a go-to option due to its long handle that provides extra leverage, some modern bikes might only require an Allen key if the pedals are designed accordingly.
A pedal wrench typically comes in two sizes: 15mm and 9/16 inch. It is advisable to check your bike’s pedal specifications or manual before selecting the correct wrench size. An Allen key, commonly a 6mm or 8mm, is used to fit into the opening at the end of the pedal spindle present in some pedals. In addition to these tools, some cyclists might use grease to ensure smooth installation and prevent the pedals from seizing.
Gathering these tools in advance will prevent any last-minute hiccups. Remember, ensuring you have a clean and organized workspace will make the process even smoother. Functioning on a stable surface also provides the leverage needed while dealing with stubborn pedals.
Left vs right pedals explained – what are the differences?
Right pedal threading
The right pedal, otherwise known as the drive-side pedal, has a standard threading process. This means that to tighten the right pedal, you rotate it clockwise, and to loosen, counterclockwise. This straightforward process differs from what you might encounter on the left side.
Understanding the threading process is crucial to preventing damage to the pedal threads or the crank. Always ensure that the spindle is aligned correctly before tightening to avoid any mishaps. Rushing this step can lead to cross-threading, which might necessitate a more costly crankset replacement.
Left pedal threading
Unlike the right pedal, the left (non-drive-side) pedal has reversed threading. This is purposely designed to prevent the pedal from loosening over time as you ride. Therefore, to tighten the left pedal, you rotate it counterclockwise, and to loosen, you turn it clockwise.
This non-standard threading can catch many new cyclists off guard. However, once you familiarize yourself with this concept, changing the pedals becomes intuitive. This reversed threading is a quintessential aspect of bike maintenance and equally important in ensuring the longevity of your pedals.
How to tell apart left and right pedals
To avoid confusion when attaching the pedals, manufacturers often mark them with an ‘L’ or ‘R’ on the pedal spindle or near the crank arm. Simply look for these marks as a reference during installation. This subtle yet effective marking system is a reliable guide, particularly if you’re juggling multiple tasks or early in your cycling repairs journey.
Beyond the markings, observing the direction the pedals unscrew can serve as a practical guide. If it tightens clockwise, it belongs on the right; if it tightens counterclockwise, it’s meant for the left. Familiarizing yourself with these nuances ensures both swift and correct installation every time you switch out your pedals.
How to remove pedals from a bike
Step 1: How to remove the right (driveside) pedal from your bike
Begin by positioning your bike on a stable surface or using a repair stand to elevate it for easier access. Use a pedal wrench or Allen key to grip the pedal spindle. To remove the right pedal, turn the tool counterclockwise. Apply pressure steadily until the pedal begins to loosen.
Once you’ve got it moving, you can typically finish unscrewing it by hand. If you encounter resistance, apply a bit of lubricant to the threads and allow it some time to take effect before attempting again. Keep a clear mental note of the original threading, as this can help immensely during reinstallation.
Step 2: How to remove the left (non-driveside) pedal from your bike
For the non-drive-side pedal, ensure you are using the correct reverse threading approach. Turn the pedal wrench or Allen key clockwise to loosen the pedal. Just like its counterpart, consistent pressure and a bit of patience are key here.
If the left pedal is difficult to remove, consider gently tapping the pedal wrench with a mallet. Applying lubricant can also aid in loosening any stubborn threads. Always be cautious not to apply excessive force, as this can damage the pedal or the crank arm.
How to change bike pedals
Step 1: How to fit the right (driveside) pedal to your bike
Ensure the right pedal is clean and lightly greased; this helps in smooth installation and future removals. Align the pedal threading with the crank hole and hand-tighten it clockwise. Using a pedal wrench or Allen key, ensure the pedal is securely fastened by turning clockwise until it’s snug.
Do not over-tighten, as this can damage the threading. Instead, ensure it is firmly in place, giving you peace of mind during your rides. It’s a good practice to check your pedals periodically for tightness, ensuring ongoing safety and performance.
Step 2: How to fit the left-hand (driveside) pedal to your bike
Repeating the same cleaning and greasing process, take the left pedal and thread it into the crank hole counterclockwise by hand, ensuring it’s properly aligned. Use a pedal wrench or Allen key to tighten the pedal by turning counterclockwise.
Again, avoid over-tightening. The beauty of cycling maintenance lies in precision and balance, rather than brute force. Once installed, double-check both pedals to ensure they’re secure and ready for your next adventure.
Bicycle pedals we recommend and cycling cleat advice
Choosing the right pedals can dramatically impact your cycling experience. Clipless pedals like the Shimano PD-M530 provide excellent control and energy efficiency, suitable for both beginners and experienced cyclists. For those inclined towards flat pedals, the RaceFace Chester Pedals offer durable performance with an excellent weight-to-strength ratio.
Along with the pedals, consider the accompanying cleats. Cleats that match your riding style and shoe preference, like SPD cleats for Shimano pedals, can enhance power transfer and comfort. Always ensure cleats are precisely aligned with your shoes to prevent any discomfort or injury.
Ultimately, choosing pedals and cleats should align with your cycling needs, style, and comfort level. Regular checks and maintenance will keep your gear in top condition, making every ride more enjoyable, safe, and efficient.
Summary of main points
| Section | Key Points |
|---|---|
| Tools required to change bike pedals | Pedal wrench, Allen key, lubricant, and a clean workspace are crucial. |
| Left vs right pedals explained | Right pedals tighten clockwise; left pedals tighten counterclockwise. Use ‘L’ and ‘R’ markings to differentiate. |
| How to remove pedals from a bike | Use the pedal wrench or Allen key; apply steady pressure, use lubricant if needed. |
| How to change bike pedals | Ensure correct alignment, don’t over-tighten; maintain balance and precision. |
| Bicycle pedals we recommend and cycling cleat advice | Choose pedals according to cycling style; ensure cleats are correctly positioned for comfort and performance. |


